Atag VA2214MQ Gebrauchsanweisung Seite 133

Settings
5 TAB
6 Automatic door
opening
F-- Error readout
rSt Restore factory defaults
End Exit
Alternatives
5:00 (Off) Activate this setting when using an all-in-one detergent
5:01 (On) that contains rinse aid.
This setting reduces the rinse aid dosage and affects
how often the dishwasher's built-in softener is
regenerated.
Pre-selected at factory: 00
6:00 (Off) The dishwasher door opens automatically, which shortens
6:01 (On) the program time and improves the drying results. Wait
until the dishwasher indicates that the program has ended
and the dishes have cooled before unloading the
dishwasher. (If the dishwasher is built-in the surrounding
furnishings must be resistant to any condensation from
the dishwasher.)
Not available for: Hygiene 70°, Self-clean
Any error messages.
When contacting the service department, you may be
asked to provide the most recent error messages.
Restores all settings to the factory defaults.
Select rSt and press
To exit the dishwasher's settings menu, select End and
press
.
.
Settings
19