D-Link DIR-635 Benutzerhandbuch Seite 184

Section 4 - Security
Configure WPA-Enterprise (RADIUS)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
1.
Click on Setup and then click
side.
2. Next to Security Mode, select WPA-Enterprise.
3. Next to WPA Mode, select WPA, WPA2, or WPA2 Only.
WPA2 if you have wireless clients using both WPA and
WPA2.
4. Next to Cipher Mode, select TKIP, AES, or Auto.
5. Next to Group Key Update Interval, enter the amount of time
before the group key used for broadcast and multicast data is
changed (3600 is default).
6. Next to Authentication Timeout, enter the amount of time before
a client is required to re-authenticate (60 minutes is default).
6. Next to RADIUS Server IP Address enter the IP Address of your
7. Next to RADIUS Server Port
D-Link DIR-635 User Manual
on the left
65