Advanced Wireless Settings - D-Link DIR-635 Benutzerhandbuch

Section 3 - Configuration
Set the transmit power of the antennas.
Transmit Power:
Beacons are packets sent by an Access Point to
Beacon Period:
synchronize a wireless network. Specify a value.
100 is the default setting and is recommended.
This value should remain at its default setting of
RTS Threshold:
Fragmentation
Threshold: in bytes, determines whether packets will be
fragmented. Packets exceeding the 2346 byte
setting will be fragmented before transmission.
2346 is the default setting.
DTIM Interval:
setting. A DTIM is a countdown informing clients
of the next window for listening to broadcast and
multicast messages.
802.11d:
countries that cannot use the 802.11 standard. This feature should only be enabled if you are in a country that requires it.
WMM is QoS for your wireless network. Enable this option to improve the quality of video and voice applications for your
WMM Function:
wireless clients.
Short GI: Check this box to reduce the guard interval time therefore increasing the data capacity. However, it's less reliable and may
create higher data loss.
D-Link DIR-635 User Manual

Advanced Wireless Settings

43