Cleaning & Maintenance - Lacor 69579 Gebrauchs- Und Instandhaltungsanleitung

10.- Follow the instructions below to disassemble the accessories.
a.- Grating or cutting disk: Turn the lid clockwise to remove it and then remove the cutting
disk.
b.- Juicer: Turn the juicer clockwise to remove it.
c.- Blade, mixer/kneader accessory or blender accessory: Turn the lid clockwise to
remove it. Remove the accessory you used along with the blade shaft.
d.- Blender pitcher: Turn the blender pitcher clockwise to remove it and pour the contents
into another container.
11.- Turn the pitcher clockwise to remove it and pour the contents into a glass or another container.
1.- Unplug the appliance and make sure the motor is stopped before starting with cleaning.
2.- Clean the motor body with a damp cloth and dry it off. Make sure there is no food left on the
motor base.
WARNING:
The motor body cannot be submerged.
3.- Wash the other accessories with soap and water. Be very careful when handling the blades
and cutting disks because they are extremely sharp. Cut protection gloves should be worn when
handling those parts.
4.- If one of the plastic parts has become discoloured from food follow the instructions below to
clean it.
a.- Wash the part with soap and hot water and rinse it off.
b.- Pour some white vinegar with lukewarm water into the container and let it work for a
few minutes.
c.- Wash the part again with soap and water.
d.- Repeat the process as many times as necessary until the part is completely clean.
5.- Dry all the accessories after washing them.
6.- Store the appliance in a well ventilated place without humidity.
CLEANING / MAINTENANCE
45