Product Overview - Toro Revolution 60V Bedienungsanleitung

Product Overview

Left side of the machine shown.
1. Tip guard
2. Blades
3. Blade guard
4. Hand guard
5. Auxiliary handle
6. Auxiliary-handle switch
7. Handle-rotation button
Figure 3
8. Lock switch
9. Trigger
10. Battery latch
11. Speed/Anti-jam switch
12. Vents
13. Protective cover
Specifications
Model 66220T
Rated 60V DC maximum, 54 VDC nominal
Voltage
Overall 113 cm (44-1/2 inches)
Length
Hand/Arm Refer to the included Declaration of Conformity
Vibration at document
Main Handle
g365005
Hand/Arm Refer to the included Declaration of Conformity
Vibration at document
Front Handle
Weight
4.1 kg (9.2 lbs)
(without
battery)
Cutting 660 mm (26 inches)
Length
Cutting 30 mm (1.2 inches)
Width
Charger Toro 60V lithium-ion chargers
Type
Battery Type Toro 60V lithum-ion batteries
Appropriate Temperature Ranges
Charge/store the battery pack
at
Use the battery pack at
Use the machine at
*Charging time will increase if you do not charge the
battery pack within this range.
Store the machine, battery pack, and battery charger
in an enclosed clean, dry area.
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous.
7
5°C (41°F) to 40°C (104°F)*
-30°C (-22°F) to 49°C (120°F)*
0°C (32°F) to 49°C (120°F)*