Toro Revolution 60V Bedienungsanleitung Seite 11

Rotating the Hedge Trimmer
Handle
1. Press and hold the rotational lock button (A of
Figure 7).
2. Rotate the handle 90° to the right or left
depending on desired cutting direction, then
release the rotational lock button to lock the
handle in the desired position (B of Figure
Figure 7
Using the Speed/Anti-jam
Switch
The hedge trimmer has multiple speed settings; move
the switch forward to the H position for high-speed.
Move the switch to the center position for low-speed
cutting (Figure
The switch also includes an anti-jam setting; move the
7).
switch back to temporarily reverse the motion of the
blades to free a jam
1. High speed position
2. Low speed position
g365008
9
8).
(Figure 8).
Figure 8
3. Anti-jam position
g365021