1. INTRODUCTION Congratulations on your purchase of the Marmitek MegaView 91™! The MegaView 91™ provides a simple way to extend an HDMI (High Definition Multimedia Interface) signal or DVI (Digital Visual Interface) over a single CAT5e/6 Ethernet cable. It even works on your existing home network (LAN) including routers and switchers.
RJ-45 jack according to EIA/TIA T568B standard When the set is connected to a home network (LAN), Marmitek recommends the use of switchers and routers with Gigabit (1000Mbps) network ports for best performance. Instead of CAT5e cable, CAT6 cable may also be applied (this offers better quality).
Seite 5
Switch off all appliances before you start connecting. Connect the HDMI source (Blu-ray disc player, TV Decoder, Media Centre PC, etc.) to the MegaView 91 transmitter [1], using an HDMI cable (not provided). Optional: connect an HDTV to the MegaView 91™ transmitter [2] with an HDMI cable to HDMI OUT, to be able to continue to watch TV in this room.
Seite 6
EXT button of your remote control. You will receive images from the connected A/V device immediately. The MegaView 91™ can also be used to operate the HDMI source from another room, by pointing your own remote control at the IR receiver and pressing a button.
The screen will display the text ‘’Please check the TX input signal’’ Please check that the HDMI source is on. Do you have any questions that are not answered above? Please check www.marmitek.com. MegaView 91™...
For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product. MegaView 91 Back Usermanual_124x176_TV & video.pdf 1 7-11-2019 13:48:47 MegaView 91™...
COPYRIGHTS Marmitek is a trademark of Pattitude B.V. MegaView 91™ is a trademark of Marmitek B.V. All rights reserved. Every effort has been made to ensure that the information in this manual is accurate. Marmitek is not responsible for printing or clerical errors. Copyright and all other proprietary rights in the content (including but not limited to model numbers, software, audio, video, text and photographs) rests with Marmitek B.V.
1. EINFÜHRUNG Herzlichen Glückwunsch zum Erwerb des Marmitek MegaView 91™. Der MegaView 91™ macht es auf einfache Weise möglich, ein HDMI (High Definition Multimedia Interface) Signal oder DVI (Digital Visual Interface) über ein CAT5e/6 Ethernetkabel zu verlängern. Arbeitet sogar mit Ihrem vorhandenen Heimnetzwerk (LAN) zusammen, einschließlich Routers und...
RJ-45 Anschluss gemäß der EIA/TIA T568B Norm Marmitek empfiehlt bei einem Anschluss des Sets an das Heimatnetzwerk (LAN), Switcher und Router mit Gigabit (1000Mbps) Netzwerkanschlüssen zu verwenden, da das die beste Leistung bringt. Anstatt eines CAT5e Kabels kann auch ein CAT6 Kabel verwendet werden (dieses ist von besserer Qualität).
Seite 13
Packungsinhalt enthalten) an den MegaView 91™ Sender [1] an. Optional: Schließen Sie einen HDTV mit einem HDMI Kabel an den HDMI OUT des MegaView 91™ Senders [2] an, um auch in diesem Raum weiterhin fernsehen zu können. Schließen Sie Ihren HDTV oder HD Projekter mit einem HDMI Kabel an den HDMI Out des MegaView 91™...
Seite 14
Gerät von einem anderen Raum aus oder durch geschlossene Schranktüren hindurch mit der eigenen Fernbedienung bedient werden kann. Schließen Sie den IR Empfänger an den MegaView 91™ Empfänger [6] an. Stellen Sie ihn gut sichtbar für Ihre (Infrarot) Fernbedienung auf, damit ...
A/V oder die EXT Taste Ihrer Fernbedienung drücken. Sie empfangen vom angeschlossenen A/V Gerät sofort Bild. Sie können die HDMI Quelle mit dem MegaView 91™ auch von einem anderen Raum aus bedienen, indem Sie die eigene Fernbedienung auf den IR Empfänger richten und eine Taste betätigen.
Zum Anschluss mehrerer AV Geräte an Ihren TV mit nur einem einzigen Kabel oder wenn Sie das Signal zu mehreren Fernsehern versenden möchten, bietet Marmitek Ihnen ein umfassendes Angebot an aktiven Schaltern. Weitere Infos zu diesen so genannten HDMI Switchers finden Sie auf www.marmitek.com.
Seite 18
Rates im Hinblick auf die Festlegung von Ökodesign-Anforderungen an die Leistungsaufnahme externer Netzteile bei Nulllast sowie ihre durchschnittliche Effizienz im Betrieb MARMITEK BV - P.O. BOX 4257 - 5604 EG EINDHOVEN – THE NETHERLANDS COPYRIGHT Marmitek BV ist ein Warenzeichen von Pattitude. MegaView 91™ ist ein Warenzeichen von Marmitek BV.
1. INTRODUCTION Félicitations pour l'achat du Marmitek MegaView 91™ ! Grâce au MegaView 91™ il est possible de prolonger d'une manière simple un signal HDMI (High Definition Multimedia Interface) ou DVI (Digital Visual Interface) par un seul câble ethernet CAT5e/6. Fonctionne même sur votre réseau domestique existant (LAN) y compris les routeurs et les commutateurs.
HD ainsi que sur votre deuxième téléviseur HD ou projecteur HD (par le biais du récepteur). Les produits de Marmitek ont été produits avec beaucoup de soin et sont de haute qualité. Veuillez lire ce mode d’emploi avec attention et suivre les instructions afin de bénéficier au maximum des possibilités de ce produit.