Baseus PPCX010005 Benutzerhandbuch Seite 6

For charging the power bank
When the charging line matched with the mobile power interface is connected to charge
the power supply, the power indicator lights up to show the current power, which
means that the connection is normal, and the power supply is charged. If the power
indicator does not light up after connecting the charging line, it means that the
connection fails and there is no charging, please check whether the charging line is
connected normally.
Operation for discharging by cable
Connect the USB charging cable to the corresponding output port of the power supply,
and the power supply will automatically turn on the output. Due to compatibility
problems, some smart phones need to press the key to turn on the power output
function, which is a normal phenomenon and need to be ignored. Press the key once to
supply power to the external equipment. Press the key once to output power for about
30 seconds. If there is no external load in 30 seconds, the power output will be
automatically turned off.
Operation for discharging by wireless
When the power indicator lights up for about 30 seconds, the mobile phone will be
charged for wireless charging within 30 seconds. If the mobile phone is placed in the
wireless charging area of the power supply, the mobile phone can be charged for
wireless charging. If there is no wireless charging access within 30 seconds after one key,
the product will automatically turn off the wireless charging function.
Wireless charging tips
The wireless charging mobile phone should be placed in the wireless charging area of
the product (the transmitting area of the wireless charging coil is illustrated in the figure)
for wireless charging. The wireless charging distance is within 8 mm. If the distance
exceeds 8 mm, the wireless charging can not be carried out. Please adjust the wireless
charging distance within the wireless charging range.
6