Frequency Channel; Declaration Of Conformity - nedis WLTK1010BK Kurzanleitung

2.5 mm audio port
A
t
Belt clip A
y
Battery
Compartment A

Frequency channel

The product meets all required standards for radio equipment using PMR 446
frequencies as authorized. The use of this two-way radio product involves the
public airways and its use may be subject to local laws or regulations. Contact
your radio licensing authority for more information.
Europe (8CHS)
Frequency channel
1. 446.00625
2. 446.01875
3. 446.03125
4. 446.04375

Declaration of Conformity

We, NEDIS, as manufacturer, declare that product WLTK1010BK from the brand
Nedis, produced in China was tested according to all relevant CE standards /
regulations and passed all tests.
Plug walkie talkie headphones (not included) into the
2.5 mm audio port.
If you use the PTT button of the headphones, also
4
use the microphone of the headphone.
Do not connect other headphones to prevent
4
damage to the product.
-
Extended exposure to high volumes from
headphones can cause hearing loss.
Hold the latch and move the belt clip upwards, to
remove the belt clip.
Slide the belt clip in to fasten the belt clip.
If the battery is low, the battery icon will flash and a
u beep will sound to indicate that the batteries must
be recharged.
Remove the belt clip A
4
opening the battery compartment A
Remove the batteries, if you do not use the
4
product for an extended period of time.
y from the product before
5. 446.05625
6. 446.06875
7. 446.08125
8. 446.09375
8
u .