Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
a
Quick start guide
Wi-Fi Smart COB LED strip
For more information see the extended manual online:
ned.is/wifilsc20cwt
Intended use
This product is a Smart Wi-Fi LED strip with a wireless remote control.
The product is not intended for professional use.
The product is intended for indoor use only.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
Main parts (image A)
1
Power cable
Controller
2
Brightness buttons
3
4
Power On button
Mode button
5
Controller plug
6
7
IR receiver
LED strip
8
Safety instructions
-
WARNING
• Ensure you have fully read and understood the instructions in
this document before you install or use the product. Keep the
packaging and this document for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective. Replace
a damaged or defective product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician for
maintenance to reduce the risk of electric shock.
• Do not expose the product to water or moisture.
• Do not switch on the LED strip if it is still coiled on the plastic reel.
Installing the app
1. Download the Nedis Smartlife app for Android or iOS on your
phone via Google Play or the Apple App Store.
2. Open the Nedis Smartlife app on your phone.
3. Create an account with your mobile phone number or your
e-mail address and tap Continue.
4. Enter the received verification code.
5. Create a password and tap Done.
6. Tap Add Home to create a SmartLife Home.
7. Set your location, choose the rooms you want to connect with
and tap Done.
Connecting the product
1. Plug the power cable A
1
2. Plug the controller plug A
6
3. Plug the power cable A
1
4. Check if the LED strip A
8
If the LED strip A
does not blink, press and hold the power
4
8
button A
on the controller A
4
5. Tap + in the top right corner.
6. Under Search Device, select the product from the list of available
devices.
7. Check if the LED strip A
8
8. Enter the password of the Wi-Fi network to which your phone is
connected and tap Confirm.
9. Rename the product after it has been found and added.
WIFILSC20CWT
9
Colour temperature presets
(in K)
Day mode button
q
w
Power Off button
Timed shutdown button
e
Colour temperature buttons
r
(arrows)
Evening mode button
t
Night mode button
y
into the controller A
2
.
into the LED strip A
8
.
into a power outlet.
is blinking. If so, confirm in the app.
2
for 5 seconds.
is blinking. If so, confirm in the app.
Setting up the product
1. Unplug the power cable A
2. Clean the surface from dust and grease.
The surface must be smooth. Do not place the product on
4
knitted/wool fabrics, dust wall, rough plastic surface or frosted
glass.
3. Remove part of the 3M tape from the back of the LED strip A
4. Place the start of the LED strip A
Make sure the power outlet is within reach.
4
5. Unroll the LED strip A
strip A
8
into the desired position.
6. Firmly press the LED strip A
-
Do not use hard objects to press the LED strip A
prevent damage.
-
Do not bend the LED strip A
damage.
If desired, cut the LED strip A
4
-
Cutting the LED strip A
the product.
7. Plug the power cable A
Controlling the product
1. Press the power button A
button A
4
to switch the product on.
2. Press the power button A
button A
w
to switch the product off.
3. Press the timed shutdown button A
seconds after pressing the button.
4. Press and hold the power button A
reset the product.
5. Press the mode button A
Evening mode button A
change modes.
6. Press the brightness buttons A
7. Press the colour temperature buttons (arrows) A
temperature buttons (in K) A
of the lights.
The product can be connected to Google Home or Amazon Alexa
4
to enable speech control.
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product
WIFILSC20CWT from our brand Nedis®, produced in China, has been
tested according to all relevant CE standards and regulations and
that all tests have been passed successfully. This includes, but is not
limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if
applicable) can be found and downloaded via:
nedis.com/wifilsc20cwt#support
c
Kurzanleitung
WLAN Smart
COB-LED-Streifen
Weitere Informationen finden Sie in der erweiterten
Anleitung online: ned.is/wifilsc20cwt
Bestimmungsgemäße Verwendung
Dieses Produkt ist ein Smart-WLAN-LED-Streifen mit einer drahtlosen
Fernbedienung.
Das Produkt ist nicht für den professionellen Einsatz gedacht.
Das Produkt ist nur zur Verwendung innerhalb von Gebäuden
gedacht.
4
from the power outlet.
1
in the desired position.
8
8
, remove the 3M tape and press the LED
8
down with your hand.
8
at sharp angles to prevent
8
8
to size on the indicated cut lines.
removes the waterproof qualities of
8
1
into a power outlet.
on the controller A
4
2
4
on the controller A
2
e
to turn off the product 60
4
for 5 seconds to factory
, the day mode button A
5
t
or the Night mode button A
to adjust the brightness.
3
r
9
to adjust the colour temperature
WIFILSC20CWT
8
.
down to
or Power on
or Power off
, the
q
y
to
or the colour
Werbung
Inhaltsverzeichnis
