Cleaning & Maintenance - fillikid 4032 Bedienungsanleitung

IMPORTANT
KEEP FOR FUTURE USE: CAREFULLY READ THE OPERATING INSTRUCTIONS
CAREFULLY TO AVOID INJURY.
WARNING
- Warning: Be aware that placing the cot near an open fire or strong heat sources
such as electric heaters, gas stoves, etc. is dangerous.
- Warning: Do not use the cot if any parts are broken, torn, damaged or missing.
Only use spare parts approved by the manufacturer.
- Warning: Do not leave objects that may serve as foot restraints or that may cause
suffocation or strangulation, e.g. cords, curtain/curtain cords, in the cot; do not place
the cot near such objects.
- Warning: Never use more than one mattress in the cot.
- Warning: Only use the mattress belonging to the cot, do not add a second
mattress, danger of suffocation.
- Never leave your child unattended.
- The travel bed is only ready for use when the locking mechanism is audibly
engaged and you have carefully checked it for defects.
- If you leave your child unattended in the cot, always make sure that the movable
side panels are in the closed position.
- Do not remove the travel cot when the baby is inside it.
- Do not let your baby get out of the travel cot.
- Do not leave anything in the cot or place the cot near any other product that may
help your baby get out.
- Do not use the cot if any part is broken, torn or missing and only use spare parts
approved by the manufacturer.
- The travel cot, including side rails and padding, should be fully erected before use.
The upper rails must be fully engaged.
- Avoid overloading the travel bed.
- The travel cot is intended for one child only and weighs less than 15 kg.
- If the opening or closing does not work correctly, check the travel cot carefully and
follow the instructions to avoid damage.
- If the child can sit on its own, do not use the bed hanging, danger of injury
CLEANING & MAINTENANCE:
1) Use only household soap or detergent with warm water.
2) Use lukewarm water for washing and let it drip and dry well. DO NOT BLEACH.
3) Do not store or use the travel bed in places with high or low temperature or
humidity and always ensure adequate ventilation.
ASSEMBLY:
1
1) Take the travel cot out of the
transport bag.
3
3) Unfold both opposite sides, by pulling them
up until you can hear them click into position.
STOWING AWAY:
2
1
1) Take out the mattress 2) Loosen the fixations of the sides by pressing the button in the middle and
and pull the strap in the drop the sides down to create a "V". If one side does not collapse comple-
middle all the way up, until it tely, use the strap to pull the center of the floor up to the top further and
is above the frame. release the middle buttons again. Slide all 4 corners and feet together to
form a small square.
3 4
2
2) Open the mattress and lay it to the side.
4
4) Press the floor down, until it's completely flat and
stable. Place the mattress in the playpen.
3) Wrap the playpen in the mattress and close the
velcro clasps.
4) Place the travel cot in the transport bag.
Fillikid GesmbH | Tiefentalweg 1, A-5303 Thalgau, Austria | fillikid.at
EN