fillikid 4032 Bedienungsanleitung Seite 5

EN
How to adjust the bedrail:
Warning: there are two positions for adjusting.
Warning: If u need to fold the playpen, u
should make the rail position back. Pls don't
put the rail in first height position or second
height position.
Push up the button on two sides and push
down the bedrail concurrently to the first height
position
Push up the button on two sides and push
down the bedrail concurrently to the second
height position
Attention: whether u use the first height
position or the second height position, pls use
zipper to fix the rail cover accordingly.
Fillikid GesmbH | Tiefentalweg 1, A-5303 Thalgau, Austria | fillikid.at
ASSEMBLY INSTRUCTIONS FOR THE LYING AREA
1. Take the Zipper to the hand.
2. Snap the zipper into place
(see picture 1,2)
3. Close the entire zipper around the travel cot. (see picture 3,4)
4. Now secure the cover to the Velcro fastener. (see picture 5)
picture 3
5. Then take two metal bars with different ends and put them in the pockets provided
and in each other. (see picture 6,7,8)
picture 6
6. Finally lay the mattress on the lying surface. (see picture 9,10)
picture 9
picture 1 picture 2
picture 4 picture 5
picture 7 picture 8
picture 10
Fillikid GesmbH | Tiefentalweg 1, A-5303 Thalgau, Austria | fillikid.at
EN