tell IP Bridge PRO Schnellinstallierungsanweisung Seite 7

IP Bridge PRO Quick Guide 7
MOBILE APPLICATION
The IP Bridge is able to send Push message due to an event, and the
status of the inputs can be checked and also controlled through the
mobile application. The TELL Control Center is available in the App Store
and in the Play Store.
First enable this service on the Mobile application tab, then set the IP
address and port of the server used for Push sending and then select
the network type and backup network type. In default the server set-
ting fields are filled with the data of manufacturer's server reserved
for this purpose, and the network is the Default network set on the
General tab.
Server IP: 54.75.242.103
Port: 2020
4 mobile devices can be registered for the module. Each slot has a uniqe
identifier that can be displayed by clicking the QR code button at the end
of the line. In the mobile application you can register a device into the
module by scanning the QR code of the given slot. After the registration
the mobile application's ID and the mobile device's name are listed here.
-> Chapter 6.6 of the User manual
EVENT SETTINGS
Internal and external events of the module can be configured on the
Events tab of Settings menu item. You can add unique names to the
events, that appear in the event log and reports. The names of the
inputs are also displayed in the status menu.