Herunterladen Inhalt Inhalt Diese Seite drucken

Test Mode; Cleaning And Care; Technical Data - Unitec 31184 Gebrauchsanleitung

Bewegungsmelder 160
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

After testing, the switch-on time and the desired brightness value can be adjusted individually.

9. Test mode

• Turn the LIGHT and TIME control counterclockwise up
to the stop into the TEST position: (all the way up - and sun symbol)
• Is switched on for 30 seconds when warming up, then switched off again.
• Move in the detection area. When moving, the light illuminates; when there is no movement it switches
off. Then test the sensor with movement.

10. Cleaning and care

Disconnect the power supply before carrying out work on the motion detectors.
• Wipe the outside of the device with a slightly damp, lint-free cloth.
Use a mild cleaning agent if necessary.
• Never use petrol, solvents, abrasives, metallic objects or hard brushes for cleaning.
• Never immerse the device in water.
• Do not touch the lens with your hands.

11. Technical data

Power supply:
Switching power:
Detection range:
Angle of detection:
Contact:
Assembly height:
Protection type:
Protection class:
Temperature range:
12. Disposal instructions
Caution:
Old appliances do not belong with household waste! Used electrical appliances contain valuable
resources that can be recovered and reused in recycling processes. However, they also contain
harmful substances that must not be released into the environment under any circumstances.
The crossed-out waste bin signifies that there is a legal obligation for you to take these appliances to a
separate collection point away from unsorted municipal waste. It is prohibited to dispose of the waste in
the residual waste bin or the yellow bin.
Please use the corresponding return and collection systems for the return of your used electrical appliance
or contact the retailer where you purchased the product.
8
4008153045547_31184_BDA_A5_lang_0422.indd 8
4008153045547_31184_BDA_A5_lang_0422.indd 8
220-240 V~ / 50/60 Hz
800 watts (light bulbs)
400 watts energy saving lamp
max. 9 metres
160°
1 N/O contact (no potential-free contact)
approx. 1 - 1.8 m (wall)
IP20 (splash-proof)
II
-20°C to +40°C
29.04.22 08:38
29.04.22 08:38

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis