Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Data - Sygonix 2368903 Bedienungsanleitung

4-fach-steckdosenleiste mit 2x usb, ip44
Vorschau ausblenden Andere Handbücher für 2368903:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Operating Instructions
4-Way Socket Strip with 2x USB-A, IP44
Item no: 2368903
1 Intended use
The product is a 4-way socket strip with 2x USB-A outputs and master switch.
Notes:
This product has an ingress protection rating of IP44 and is suitable for outdoor use. It is
"splash proof" and protected from objects greater than 1 millimeter in size and water
spray from any direction.
This rating is only effective if:
– The socket covers are closed.
– The plug is connected to a power outlet rated IP44 or higher.
– An IP44 rated plug is connected to the socket(s).
The USB sockets are only protected when they are closed.
Do not use the product in areas where water accumulates.
Warning labels are included in the package. Stick a label in your language over or
next to the language label on the product.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Delivery contents
Product
Operating instructions
3 Latest product information
Download the latest product information at
code shown. Follow the instructions on the website.
4 Description of symbols
The symbol with the exclamation mark in the triangle is used to indicate important
information in this document. Always read this information carefully.
Risk of electric shock!
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
The product is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
5.2 Handling
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
5.3 Sockets
The product is equipped with an enhanced protection against accidental contact. An in-
tegrated mechanism will release the holes of the receptacle only, if the two prongs of a
power plug are inserted into the two holes at once.
5.4 Operating environment
Do not place the product under any mechanical stress.
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
Protect the product from direct sunlight.
3
www.conrad.com/downloads
or scan the QR
5.5 Mains cable
Do not modify or repair mains supply components including mains plugs, mains
cables, and power supplies. Do not use damaged components. Risk of death by
electric shock!
The mains outlet must be located near to the device and be easily accessible.
Never plug in or unplug the mains plug when your hands are wet.
Never pull the mains plug from the socket by pulling at the cable. Always pull it from the
mains socket using the intended grips.
Unplug the mains plug from the mains socket if you do not use the device for an exten-
ded period of time.
Disconnect the mains plug from the mains socket in thunderstorms for reasons of safety.
Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or put
under mechanical stress.
Avoid excessive thermal stress on the mains cable from extreme heat or cold.
Do not modify the mains cable. Otherwise the mains cable may be damaged. A dam-
aged mains cable can cause a deadly electric shock.
Do not touch the mains cable if it is damaged.
– First, power down the respective mains socket (e.g. via the respective circuit breaker)
and then carefully pull the mains plug from the mains socket.
– Never use the product if the mains cable is damaged.
A damaged mains cable may only be replaced by the manufacturer, a workshop com-
missioned by the manufacturer or a similarly qualified person, so as to prevent any
danger.
Ensure that cables are not pinched, kinked or damaged by sharp edges.
Always lay cables so that nobody can trip over or become entangled in them. This poses
a risk of injury.
5.6 Connected devices
Also observe the safety and operating instructions of any other devices which are con-
nected to the product.
5.7 Product
Do not connect the product in series!
Do not operate the product while covered.
De-energised only when unplugged.
Take special caution when children are around. Children cannot recognize the danger
arising from the incorrect use of electrical devices. There is a risk of a life-threatening
electric shock!
6 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Disconnect the product from the power supply.
2. Clean the product with a dry, fibre-free cloth.
7 Disposal
This symbol must appear on any electrical and electronic equipment placed on
the EU market. This symbol indicates that this device should not be disposed of
as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-
back of waste. Conrad provides the following return options free of charge (more details on
our website):
in our Conrad offices
at the Conrad collection points
at the collection points of public waste management authorities or the collection points
set up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply
in countries outside of Germany.

8 Technical data

Rated power ................................... max. 3680 W
Cable type ...................................... H07RN-F 3G1.5 mm²
Ingress protection........................... IP44
Cable length ................................... 1.4 m

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis