Maintenance And Care; Technical Data - Sygonix 2269128 Bedienungsanleitung

Socket Strip item no. 2269140
This power strip has surge protection. The surge protection is ready when the red warning
light shines.
If the red warning light does not shine, the surge protection has tripped. In this case, the socket
strip may still be used, but surge protection is no longer provided.
In case of overtemperature, an integrated temperature fuse is triggered; the sockets are swit-
ched off. Switch off the main switch of the socket strip (switch position „O") and eliminate the
cause of the overload. Then wait at least 5 - 10 minutes to allow the socket strip to cool down,
then press the red reset button briefly.
Socket outlet cube item no. 2269266
This cube-shaped socket strip is very space-saving. A mounting bracket is included in the
scope of delivery, which makes it possible to mount it e.g. on a table. Fasten the holding bracket
to the table using suitable screws (not possible with glass/metal surfaces, in this case Velcro
tape or double-sided adhesive tape should be used). Then the socket strip can be plugged
onto the holding bracket.
Socket strips with USB charging ports
Some of the socket strips (see chapter „Technical Data") have USB charging ports. Suitable
devices (e.g. smartphones) can be charged via these ports.
Item no. 2269128
The fast charge port (blue USB-A socket) provides an output power of up to 18 W. The out-
put voltage is automatically set on this port depending on the connected device (possible is
12 V/1.5 A, 9 V/2 A, 5 V/3 A). If your device does not support this, the port automatically provi-
des the usual USB voltage of 5 V/DC.
A combined output current of 2.1 A (10.5 W) is available at the other two USB A sockets; the
USB-C™ charging port supplies 5 V/3 A (15 W).
The total output power of all connectors is 24 W.
Item no. 2269131, 2269138, 2269139, 2269140, 2269266
The combined total output current is max. 2.4 A (12 W)

Maintenance and Care

• The product is maintenance-free for you. The product contains no parts that require servi-
cing. Therefore, do not open/dismantle it. Maintenance or repair may only be performed by
qualified personnel or a specialised repair shop.
• Before cleaning the socket strip, first disconnect all loads. Then unplug the socket strip from
the mains socket (wall socket).
• Use a clean, dry and soft cloth for cleaning.
• Dust can easily be removed using a clean, soft, long-bristled brush and a vacuum cleaner.
Do not use abrasive cleaning agents, cleaning alcohol or other chemical solutions
since these could damage the housing or even impair operation.
Disposal
Electronic devices are recyclable material and do not belong in the household was-
te. Dispose of the product at the end of its service life in accordance with the relevant
statutory regulations.

Technical Data

Ambient temperature .................... -5 °C to +40 °C
Ambient humidity .......................... <85% (relative, non condensing)
Other data see table.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE. *2269128ff_V5_1120_02_VTP_m_4L