"Mode" Button - Ventus DUAL TECH LRG04-18JR Gebrauchsanweisung

"MODE" BUTTON

This button selects the fan operation during COOL or FAN mode to save energy and get a less
disturbance level. Press the button MODE again to choose your desired wind mode as per the
following sequence:
NORMAL
(fan always on)
WARM FUNCTION
During WARM mode, no water is put in the unit. Fan mode and fan speed settings are not
available. With the unit already on, press the WARM button, the PTC system will start to work
and air flow will be warm.
The defaul heat setting is low with 1200 W
Pressing again the Warm button, the heat increases to 2000 W
•
• Pressing again the Warm button, the unit returns to FAN function, with no heat.
NATURAL
(fan stops
after several
seconds)
SLEEP
(fan stops for
a longer time)
9