Ventus DUAL TECH LRG04-18JR Gebrauchsanweisung Seite 11

CLEANING HONEYCOMB PANEL
Unlock the Frame Cover by moving the two honeycomb panel knobs upwards. Remove the
frame cover and the honeycomb panel frame, then remove the honeycomb panel and wash
under running water and with a neutral detergent, using a soft brush or cloth.
Reinstall the Honeycomb Panel on the Frame, install in the unit and put the Frame Cover. Lock
the two Honeycomb Panel knobs by moving them downwards. If the unit is not going to be
used for some time, leave the parts to dry before reinstalling.
Do not use brushes with thick bristles to wash the Honeycomb Panel and other parts, as they
can damage them and make them less effective.
1
2
3
1. Rotate the filter knobs outwards like in the photo.
2. Pull out the frame cover.
3. Take out the Honeycomb panel frame.
11