Rotating Bezel - Seiko PROSPEX 1965 DIVER Bedienungsanleitung

l Date adjustment at the beginning of the month
It is necessary to adjust the date on the first day after a month that has less than
31 days.
Ex.) To adust the date in the a.m. period on the first day of a month following a 30-
day month.
1. The watch displays "31" instead of "1". Pull
out the crown to the first click.
2. Turn the crown to set the date to "1" and then
push the crown back in to the normal position.
CAUTION
• Do not set the date between 10:00 p.m. and 1:00 a.m. If you do, the date
may not change properly / it may cause a malfunction.
14

ROTATING BEZEL

The rotating bezel can show up to 60 minutes of elapsed time.
31
AUTOMATIC
DIVER'S 200m
* For safety's sake, the rotating bezel rotates only counterclockwise, so that the time
Elapsed time
measured is never shorter than the actual elapsed time.
Turn the rotating bezel to align the
1
" " mark to the minute hand.
When time has elapsed, read the
2
number on the rotating bezel.
Example: Starting time : 10:10
Finishing time : 10:40
Elapsed time : 30 minutes
15