How To Set The Time And Date - Seiko PROSPEX 1965 DIVER Bedienungsanleitung

HOW TO SET THE TIME AND DATE

• Check that the watch is operating, and then set the time and date.
• The watch is provided with a date function and is so designed that the date
changes once every 24 hours. The date changes around 12 o'clock midnight.
If AM/PM is not properly set, the date will change around 12 o'clock noon.
1. Pull out the crown to the first click.
s e c on d han d c on tinu e s mov in g an d the
accuracy of the watch is unimpaired.)
2. The date can be set by turning the crown
counterclockwise. Turn it until the previous
day's date appears.
E x . ) I f to d ay i s t h e 6t h o f t h e m o n t h, f ir s t
set the date to "5" by turning the crown
counterclockwise.
CAUTION
• Do not set the date between 10:00 p.m. and 1:00 a.m. If you do, the date
may not change properly / it may cause a malfunction.
12
(The
5
AUTOMATIC
DIVER'S 200m
3. Pull out the crown to the second click when the second hand is at the 12 o'clock
position. (The second hand stops on the spot.)
Turn the crown to advance the hands until the date changes to the next. The
time is now set for the a.m. period. Advance the hands to set the correct time.
4. Push the crown back in to the normal position in accordance with a time
signal.
AUTOMATIC
DIVER'S 200m
CAUTION
• The mechanism of mechanical watches is different from that of quartz
watches.
When setting the time, be sure to turn back the minute hand a little
behind the desired time and then advance it to the exact time.
6
13