pasapair OL20-BD030BM Bedienungsanleitung Seite 27

Water
Leakage
Excessive
Noise
E2
Error
CL
code
CH
 Check if the room
temperature
below 20℃.
 Set humidity level is
higher
currentHumidity
value.
 Overflow
moving the unit.
 Check if the drain
hose is kinked or
bends.
 Check if the unit is
securely positioned.
 Check if any loose,
vibrating parts.
 Noise sounds like
water flowing.
 Humidity sensor
dampened
failure.
 Display when Room
temperature
below 5°C（41°F）.
 Display when Room
temperature
above38℃ （100°F） .
 This is normal. Low humidity in
is
low temperature environment.
than  Set the humidity level below
current humidity value.
while  Empty the water tank before
transport.
 Straighten the hose to avoid a
trap existing.
 Place the unit on horizontal and
firm ground.
 Secure and tight the parts.
 Noise
refrigerant. This is normal.
 To clean or replace the humidity
or
sensor.
 Normal. The compressor stops,
is
and the fan keeps running.
 Normal. The compressor stops,
is
and the fan keeps running.
23
comes from flowing