pasapair OL20-BD030BM Bedienungsanleitung Seite 19

TIMER:The timer can be set for up to 24hrs.
Pressing the timer button will increase the timer by 1hr which will be
shown on the display.
The timer when set will operate until time has elapsed and the unit will
go into standby mode.
To turn the timer off press the Timer Button until "00" is displayed.
In the running state, set the time to turn off the machine;
in the standby state, set the time to turn on the machine.
Note: when press ON/OFF will also exit the timer setting.
Notice: Since the fan action to start the cumulative timing, action
time more than 600h, the filter indicator lights up to remind users
of the filter cleaning, at this time the compressor, negative ion all
off, the fan delayed 60s off. Long press the sleep button 3s to
reset the filter, at this time, the fan action time accumulated clear
0, the filter indicator lights off, dehumidifier automatically restore
the filter cleaning before the power on state (including negative
ion, frost state, etc.). The compressor starts immediately if it is
outside the 3-minute protection time.
SPEED:This can only be changed in Automatic mode. Pressing this will
cycle the fan speed between High and Low.
UP
Press this button to set up humidity and timing time;
Pressing the button will increase the set humidity by 5%
increments,according to the cycle of 30%-80%.
15