Mounting The Control Unit; Electrical Connection - AFRISO HMS Betriebsanleitung

5.3

Mounting the control unit

 Verify that the permissible ambient temperature is not exceeded at the
installation site.
 Verify that the control unit is accessible and easy to oversee at all times.
 Verify that the control unit is protected against water or splash water.
 Verify that the control unit is not mounted in a humid room.
1. Plug the control unit into a suitable isolated, earthed power outlet.
5.4

Electrical connection

ELECTRIC SHOCK
• Verify that the degree of protection against electric shock (protection class,
double insulation) is not reduced by the type of electrical installation.
Failure to follow these instructions will result in death or serious injury.
ELECTRIC SHOCK CAUSED BY LIVE PARTS
• Disconnect the mains voltage supply before performing the work and ensure
that it cannot be switched on.
• Verify that no hazards can be caused by electrically conductive objects or
media.
Failure to follow these instructions will result in death or serious injury.
Mounting
DANGER
DANGER
EN
13
HMS