Assembly; Use - Cleanmaxx 05249 Gebrauchsanleitung

Universal Cleaning Brush with Battery

ASSEMBLY

Attaching / Detaching the Extension
• If you want to use the extension
rod (13), screw together the two
parts. Then push the extension
rod into the mount (18) of the main
unit (2) and screw it in hand­tight
(Picture D).
• To detach the extension rod, twist it
out of the main unit and detach it.
Attaching / Detaching Accessories
• Plug the attachment you want (3, 9, 10)
or one of the adapters (1, 4) onto the
mount (14) of the main unit (2). The
attachment / adapter must engage
audibly.
If you are using an adapter, then select
the textile accessory (6, 7, 8, 11, 12),
place it with the hook­and­loop side
on the adapter and press it on.
• To detach the attachment / adapter,
pull it off the main unit (Picture E).
Functions of the Accessories
• Brush (large): Ideal for cleaning sur­
faces indoors and outdoors.
• Brush (small): Ideal for cleaning small
surfaces such as washbasins, sinks or
furniture.
• Brush (pointed): Ideal for cleaning
areas which are difficult to access such
as corners, crevices, wheel rims or
extractor hoods.
• Mop (large, small): Suitable for clean­
ing surfaces such as floors, tables or
a car.
• Polishing cloth (wool): For polishing
all kinds of smooth surfaces, e.g.
wheel rims, tiles, etc.
• Fibre sponge: Suitable for removing
stubborn dirt such as on a stove or
extractor hood.

USE

Please Note!
■
The device should only be used if it has
been fully and correctly assembled and
the charging socket is closed!
■
Always switch off the device first
before attaching or removing any
accessories!
■
Do not use the device when it is con­
nected to the charger cable.
L
Switch off the device after you
finish cleaning each surface to
significantly increase the operating
time on each battery charge.
1. Attach the attachment you want or
an adapter with an accessory (see the
"Assembly" chapter – "Attaching /
Detaching Accessories").
2. Press the button (15) on the main
unit (2) to switch on the device:
Press 1 x – fast rotation
Press 2 x – slow rotation
3. Guide the accessory over the surface
to be cleaned or polished.
4. Press the button one more time to
switch off the device.
5. Detach and clean the used accessory
after use (see the "Cleaning and Stor­
age" chapter).
EN
15