Herunterladen Inhalt Inhalt Diese Seite drucken

Items Supplied; Operation; Connecting; Put On The Headphones - Switch ON SOKH 64 E1 Bedienungsanleitung

On-ear-kopfhörer
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Protect the cable against damage, e.g.
from:
- sharp edges
- hot places
- clamping or crushing
Do not use any astringent or abrasive
cleaning agents.
In order to avoid any hazards, do not
make modifications to the device. Re-
pairs must be carried out by a specialist
workshop or the Service Centre.

4. Items supplied

1 set of headphones
1 copy of the user instructions
In the case of incomplete delivery,
please contact the responsible service
centre of the manufacturer.
Please see the illustrations on the fold-
out page.

5. Operation

Remove all packing material.
Check that the device is undamaged.
5.1

Connecting

1. Set the sound source to a low volume.
2. Insert the jack plug 4 into the head-
phone socket of the sound source (e.g.
MP3 player, television).
5.2

Put on the headphones

1. Put on the headphones in such a way
that the marking R is on the right and L
is on the left.
2. Figure A: adjust the size of the head-
phones to your head size using the two
adjustable headphone earcups 2
and 9 by pulling out or pushing in.
3. Set the volume of the sound source.
Make absolutely sure that you are still
able to hear the ambient noise.
5.3

Remote control

NOTE: your smartphone must have a
3.5 mm jack socket to perform the functions
described in this chapter.
There is a microphone 8 on the remote con-
trol 6. You can perform the following func-
tions with the multifunction button 7 when
you connect the headphones to your smart-
phone:
Function
during
playback
Start/Pause
• Press briefly 1x
Next track
• Press briefly 2x
Previous track
• Press briefly 3x
Function
during a call
Answer call
• Press briefly 1x
End a call
• Press briefly 1x
• Press 1x for approx.
Reject call
5.4
Connecting a second set
of headphones
ATTENTION - Damage to property!
Only connect one set of headphones,
no splitters, and no additional audio
sources, in order to avoid damage to
the devices.
The socket 3 can be used to attach a second
set of headphones with a 3.5 mm jack plug,
to allow a second person to listen in.
Using the multi-
function button 7
1 second; function is
performed when the
button is released
GB
15

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis