Scanning For Every Channel; Scanning A Specific Transponder - Octagon SF928 GX Handbuch

Particular LNBs have an indicator light to show if the signal strength is
good enough for the receiver to perform a channel scan. This may be
useful when installing a new satellite dish. To activate this function, press
the green button and then confirm to use it.

Scanning for Every Channel

Three methods are available for scanning for every channel.
Set Search Mode to

numerous database of transponders when scanning for channels.
Choose Time Calibration and determine how long the receiver
should wait to get time information from each transponder.
Set Search Mode to

the receiver may happen to miss some channels when scanning for
channels using the transponder database. With this method, the
receiver scans all potential transponders using every possible
combination of transponder elements not to miss any channel in a
scan. However, it takes much longer time.
Set Search Mode to Fast Scan.

providers manage dedicated transponders to provide up-to-date
transponder information. With this method, the receiver uses that
sort of transponder for faster and more precise scanning. Choose
Select Operator and select a satellite TV service provider.
Make sure that the common options are properly configured before
selecting Start Search to start a channel scan.

Scanning a Specific Transponder

Generally, one transponder carries multiple TV channels. To scan a specific
transponder for the channels it carries, set Search Mode to Manual. Users
need to get several details about a target transponder.
Auto. With this method, the receiver uses its
Blind. Transponders occasionally change, so
Particular satellite TV service
21