Technical Data; Description Of Appliance; Method Of Operation - STIEBEL ELTRON ETT 500 electronic Gebrauchsanweisung

2. Operation instructions

2.1 Technical data

Width „B"
Weight (with storage blocks)
Distance interval „a"
Connection
Power output
Dimensional charge
Max. charge P
H
Storage blocks
Number of packages (blocks)
Block weight
Additional heating (special accessory)
Power output
18
for the professional
[mm]
ETT 350 ETT 500
mm 1130 1480
kg 188,5 259
mm 940 1290
3/N/PE ~ 400 V 50 Hz
kW 3,5 5,0
kWh 24,5 35
kWh 28 40
piece 10 (20) 14 (28)
kg 142 199
kW 1,0 1,5
Installation and electrical connection must be
carried out by a qualified installer, following
these instructions closely.

2.2 Description of appliance

1 Control panel
2 Side wall, right
3 Front wall
4 Air outlet grille
5 Air inlet grille
6 Fluff screen
7 Inside front wall
8 Storage blocks
9 Cover plate
10 Thermal insulation
11 Floor thermal insulation
12 Cable duct G
13 Air flow device K
E5 Heating element
M1 Blower fan
N5 Protective temperature regulator -
discharge
A1 Electronic charge regulator
V4 Operation and fault indicator
X16 Control signal adapter, 4-stage
X17 Output reducer, 4-stage

2.2.1 Method of operation

The storage blocks are heated by the heating
elements located between the storage block
rows. Charging is infinitely adjusted by means
of the charging regulator R1.
A