Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Step3: The pairing will start when the camera gets power (If your camera is powered by reversing light,
the pairing will start after shifting your vehicle into reverse gear). The monitor will display the image
of Cam2 when pairing is successful.
Note:
● Do not power the backup camera before completing steps 1-2.
● The pairing timeout is the default 30s. If the pairing does not finish in 30s, the pairing screen will close
automatically, and then the monitor enters standby mode, please follow the steps to pair the camera
again. If the pairing is failed after many attempts, please contact customer support for help (Customer
support email: service@auto-vox.com).
● The Cam1 is pre-paired with the monitor, and it is set as rear camera as default.
Technical Specifications
Camera
View angle diagonal
Current consumption
Operating frequency
Power supply
Minimum illumination
Operating temperature
135°±5°
Max 650mA (@12V)
2.4GHz ISM
DC 12-24V
0 Lux (Fully automatic night switch
infrared light fill light）
-20°C~65°C/-4℉~149℉
4
Werbung
Inhaltsverzeichnis
