Auto-Vox W10 Bedienungsanleitung Seite 5

Step3: Use the electric drill or other professional equipment to install the camera bracket on the vehicle
with the self tapping screws.
Step4: Thread the camera cable into the thread hole and plug in the waterproof plug.
Step5: Fix the camera with the screws.
4. Connect the camera cable
Connect the 2 pin male plug of the camera cable to the female
plug of the power cable.
Make sure you don't lose the waterproof rubber ring. Then tighten
the nut. Make sure the cables are not pinched or knotted.
Pair the Camera
Step1: Press M to enter the main setting menu, select Pair.
Step2: Select Cam1/Cam2, press M/OK to enter into the selected channel pairing interface (A looping
symbol appears on the screen) and the indicator lights of OK will flash fast.
Self tapping screws Waterproof plug
Step3
3
Nut
Male plug
Female plug Waterproof rubber ring
Step4