Installation; Remote Control - ZirbenLüfter CUBE II Handbuch

Installation

1. Unpack the ZirbenLüfter® and the evaporator container from the box and re-
move the transport lock. Remove the remote control and the power supply unit
from the evaporator container.
2. Place the evaporator container in a suitable place and fill the porcelain bowl of
the ZirbenLüfter® with 1.5l water (CUBE II) or 0.8l water (CUBE mini II).
3. Place the ZirbenLüfter® on the porcelain evaporator bowl. We recommend
that you do not place the ZirbenLüfter® on the floor, as it will suck in and dis-
tribute the floor dust.
4. Plug the power cable into the socket on the back of the ZirbenLüfter® CUBE II
and CUBE mini II and the power supply unit into the socket.
5. Establish a connection between the ZirbenLüfter® and the remote control.
Press and hold the On / Off button for 3 seconds within the first 15 seconds
of plugging in the unit.
6. With the remote control you can adjust the fan speed in 3 different levels and
make different light settings.
7. We wish you a pleasant room climate enlivened with natural pine scent.
8. If you have unpleasant odours in the room, are stressed or have a chill, we re-
commend dripping high-quality 100% natural Swiss stone pine oil into the eva-
porator container (2-3 drops).
20

Remote Control

On / Off (pairing)
Fan: highest level
Fan: medium level
Fan: lowest level
Light on/off
Light brighter
Light darker
Change colours
21