Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
P
OSSIBLE CAUSE
1. The appliance is not installed on a
flat and level ground. The appliance
touches a wall or another object.
2. Items have dropped behind the
appliance.
1. The door(s) is / are opened too often
or too long.
2. The temperature is set too low.
1. The temperature is set too high.
2. The environment is too warm.
3. The door(s) is / are opened too often
or too long.
1. The illuminant may be damaged.
2. Incorrect energy supply.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the aftersales service.
T
HE OPERATING CONDITIONS DESCRIBED BELOW ARE NORMAL
❖ The refrigerant generates a sound similar to flowing water.
❖ Sometimes you may hear a sound which is generated by the injection process of
the cooling circuit.
❖ The sides of the appliance may get warm while the appliance is running.
M
ALFUNCTION
(
)
S
U
NCOMMON NOISE
C
ONDENSATE ON THE GLASS DOOR
T
HE APPLIANCE DOES NOT COOL PROPERLY
T
HE ILLUMINATION IS NOT WORKING
AND DO NOT INDICATE A MALFUNCTION
M
EASURE
.
1. Install the appliance properly.
2. Remove the items.
.
1. Do not open the door(s) too often or
too long.
2. Increase the temperature (warmer).
1. Decrease the temperature (colder).
2. Keep the appliance away from direct
sunlight and other sources of heat.
Always observe the climatic class of
your
appliance
« T
ECHNICAL DATA
3. Do not open the door(s) too often or
too long.
1. Refer to chapter « R
THE ILLUMINANT
2. Check the energy supply.
(
)
S
.
in
chapter
».
.
EPLACING OF
».
.
~
66
~
Werbung
Inhaltsverzeichnis
