Eine 8 x AnyBay-Rückwandplatine und eine 8 x NVMe-Rückwandplatine
Dieser Abschnitt enthält Informationen zur Kabelführung für das Servermodell mit einer vorderen 8 x AnyBay-
Rückwandplatine und einer vorderen 8 x NVMe-Rückwandplatine.
Ein 8i/16i RAID/HBA-Adapter + integrierte Anschlüsse + eine Retimer-Karte
Von
Rückwandplatine 1: SAS
Rückwandplatine 1: NVMe 0-1, 2-3
Rückwandplatine 1: NVMe 4-5, 6-7
Rückwandplatine 2: NVMe 0-1, 2-3
Rückwandplatine 2: NVMe 4-5, 6-7
Anmerkung: * Wenn ein 16i RAID-Adapter verwendet wird, verfügt das SAS-Kabel
zusätzlichen Dummy-Anschluss (nicht in der Abbildung unten dargestellt) für die Verbindung mit dem
anderen Anschluss des 16i RAID-Adapters.
Verbindungen zwischen Anschlüssen:
Abbildung 98. SAS/SATA-Kabelführung
156
ThinkSystem SR650 V2 Konfigurationsanleitung
Bis
8i/16i* RAID/HBA-Adapter auf PCIe-Steckplatz 2:
• Gen 3: C0C1
• Gen 4: C0
Integriert: PCIe 1, PCIe 2
Retimer-Karte auf PCIe-Steckplatz 1: C0, C1
Integriert: PCIe 3, PCIe 4
Integriert: PCIe 5, PCIe 6
↔
↔
↔
,
,
, ...
1
1
2
2
3
3
Abbildung 99. NVMe-Kabelführung
über einen
1
↔
n
n