Cleaning And Care - Westinghouse WKWKB115SS Anweisungen

7. Press the ON/OFF switch (8) down towards the I marking to turn on the kettle.
• The ON/OFF switch (8) illuminates when the kettle is on and turns off when the
kettle is off.
• The kettle will switch off automatically when the water has boiled.
8. To manually switch off the kettle at any time, lift the ON/OFF switch (8) up
towards the O marking.
9. Unplug the kettle from the wall socket when it is not in use.
CAUTION
• Do not overfill the kettle, as boiling water may splash out from the spout or lid
resulting in scalding.
• Ensure that the ON/OFF switch (8) is clear of obstructions and that the lid (4)
is properly closed. The kettle will not switch off automatically if the ON/OFF
switch is obstructed or the lid is open.
• Never open the lid while the water is boiling.
• Always switch off the kettle before removing it from the power base.
BOIL DRY CUT-OFF PROTECTION
If the kettle is accidentally switched on empty or with insufficient water, the boil
dry feature will automatically cut off the power supply. Lift the kettle from the
power base and let it cool down before refilling it with water. Fill the kettle with
water up to the MAX marking to reset the boil dry protection.
Avoid boiling the kettle dry to avoid damaging the appliance and shortening its
lifespan.

CLEANING AND CARE

CAUTION
• Always unplug the appliance from the wall socket and let it cool down before
cleaning.
• Do not immerse the kettle, power base or power cord in water or other liquids.
Never rinse them under the tap or expose them to moisture.
• Never use solvents, chemical or abrasive cleaning agents, wire brushes, sharp
objects or scouring pads to clean the appliance.
General cleaning
1. Remove the kettle (2) from the power base (3). Empty the kettle (2) and rinse
the inside with water thoroughly.
2. Wipe the outside of the kettle (2) and the plastic parts of the power base (3)
with a soft cloth moistened with water or mild detergent. Dry completely with
a soft, dry cloth.
NOTE: Ensure that all connectors and sockets are kept dry.
Cleaning the scale filter
Depending on the hardness of the water in your area, scale present in tap water
may give your drinking water a cloudy or white appearance. The scale filter in your
kettle helps prevent scale particles from being poured into your drink.
Clean the scale filter regularly, especially when there are visible mineral deposits
and pouring is affected.
To clean the scale filter:
1. Press the lid open button (5) to open the lid.
2. Place a finger into the spout (1), press on the protruding nodules on the scale
EN
filter (10) to pop it out of the slot and remove.
6
WKWK115_Electric Kettle_10L_IM.indd 6 29/7/2021 6:45 PM