Hama 00053686 Bedienungsanleitung Seite 5

4. Start-up and operation
4.1.Connecting the charging station
and devices
• Connect the USB cable to a suitable
USB socket
• Connect the USB-C plug to the USB-C
socket on the charging station.
• Plug your Nintendo Joy-Con into the
charging contact(s) (A/B/C/D) on the
charging station
• When charging is active, the LED display
on the charging station lights up red.
• The charging process is nished once the
controller LED display lights up green.
Note
If the power consumption of all connected
devices exceeds the maximum power
(see 7. Technical data) of the product,
the devices may charge more slowly or
not at all.
5. Warranty disclaimer
Hama GmbH & Co. KG assumes no liability
and provides no warranty for damage
resulting from improper installation,
mounting and improper use of the product
or from failure to observe the operating
instructions and/or safety notes.
6. Service and Support
Please contact Hama Product Consulting if
you have any questions about this product.
Hotline: +49 9091 502-115 (German/
English)
Further support information can be found
here: www.hama.com
7. Technical data
Charging
IN / OUT: 5.0 V
Station
850 mA
6