GEKA plus RW40 Betriebsanleitung Seite 15

English
Translation of the original instruction manual
CAUTION!
• Do not pull at the hose without first uncoupling the drive. Manual turning can cause defects in the gearbox and drive.
• Do not unwind the hose completely. Always leave one complete layer of the hose on the hose reel. Ensure that the remaining
inner layer of the hose on the hose reel is positioned flush and securely against the sides. This is the only way to ensure that the
hose is wound up neatly.
CAUTION!
Ensure that the hose is unwound in a straight line and is centred in relation to the outlet opening of the hose. This is the only way
to ensure that the hose is wound up neatly.

Couple the gearbox again so that the hose is wound up automatically. To do so, loosen the tommy screw and pull the turbine unit
up until you feel a stop. Tighten the tommy screw in this position. Ensure that the sprockets securely interlock by trying to turn the
hose reel slightly by hand. If you can turn the hose reel, perform the coupling process again.

15