5-Channel Amplifier; Functions And Controls - ESX signum SX-5800 Bedienungsanleitung

5-Channel Amplifier SX-5800
Power - LED
Green LED is illuminated amplifier is on
Protect - LED
Red LED is illuminated:
a) Overheated
b) Speaker wires shorted
c) Overload (Impedance, less Power)
d) Amplifier is damaged
LOW PASS - Channel 5
Controls the frequency response of
your speakers upwards. The Cut-off
frequency is continously variable
from 30Hz up to 150Hz
Remote - Connection
for remote control.
Allows you to adjust the
subwoofer from
your seat
X-Over- Selects the requierd operation mode
Position HPF: Highpass (Frequency response is
limited downwards, and is fixed by
HPF-regulator)
Position FULL: Full range
(whole frequency response)

Functions and Controls

Bass EQ- Channel 5
Continously variable from 0dB up
to +12dB.
Mode - Switch
Here you can choose between
5 Channel mode
4 Channel mode
LPF BASS EQ SUB SONIC
30Hz 150Hz 0dB 12dB 15Hz 5 Hz 5
LEVEL
HPF HPF
FULL HPF 5CH 4CH FULL
X-OVER
10Hz 150Hz 5V 0,2V 10Hz 50Hz
3/4 CH CONTROLS MODE 1/2 CH CONTROLS
Level - This allows you to
match the input sensitivity
from 5 Volts to 0,2 Volts
Subsonic-Filter - Channel 5
Eliminates the lowest frequencies to
protect the speakers from damages.
Continously variable from 15Hz up to
55Hz.
LEVEL
L R
5V 0,2V
LEVEL
HPF
X-OVER
5V 0,2V
Input - RCA Inputs
Full range line input connect
with the head unit.