Battery Status - Livall EVO21 Benutzerhandbuch

IV. Operation Instructions Turn
On Your Helmet
For the first time to use, press the power on
button located at the back of the helmet, once
the tail lights illuminate the smart helmet is on.
Note: If it cannot be activated successfully,
please charge it and try again.

Battery Status

Remaining battery level is shown by the number of light beads in the middle of the tail, that is displayed when a
helmet is initially turned on. Full battery is indicated when all of the light beads are on.
Connect the Remote Control BR80 (Control the Turning Signals)
1) First connection
Within 30cm
Turn on the BR80. Within the distance
of 30cm between the BR80 and the
helmet
3
Hold the button
It will automatically connect to the helmet.
After connected successfully, the tail light of
the helmet will flash by default light mode