Bluetti EP500Pro Bedienungsanleitung Seite 51

064 Multi Brak Phase Error
065 PV Paralleling Error
081 BMS Communication Interrupt
082 LCD Communication Interrupt
083 EEPROM Read & Write Error
084 DSP Configuration Error
085 RTC Read & Write Error
086 12V/30A Port OCP
087 24V/10A Port OCP
USB/TYPE-C/PD Port Current High
088
089 DC 12V/30A Output Current High
090 DC 24V/10A Output Current High
091 DC Output soft start Failure
092 DC 12V/30A Output Short Circuit
Please check if the input of the AC voltage
meets the specifications of the unit.
Clear the alarm history or restart the unit.
Please check if the "PV parallel enable" setting
is consistent with PV input.
Please contact the dealer if the symptom
persists after rebooting the unit.
Please contact the dealer if the symptom
persists after rebooting the unit.
Please contact the dealer if the symptom
persists after rebooting the unit.
Please contact the dealer if the symptom
persists after rebooting the unit.
Please contact the dealer if the symptom
persists after rebooting the unit.
Please contact the dealer if the symptom
persists after rebooting the unit.
Disconnect the appliances connected to the
12V/30A RV port.
Clear the alarm history or restart the unit.
Disconnect the appliances connected to the
24V/10A cigarette lighter port.
Clear the alarm history or restart the unit.
Disconnect the appliances connected to the
USB ports.
Clear the alarm history or restart the unit.
Disconnect the appliances connected to the
12V/30A RV port.
Clear the alarm history or restart the unit.
Disconnect the appliances connected to the
24V/10A cigarette lighter port.
Clear the alarm history or restart the unit.
Please contact with the dealer if the error still
exists after rebooting the unit.
Disconnect the appliances connected to DC
output ports.
51
JUST POWER ON