Installation ( For Home Back Up System ) - Bluetti EP500Pro Bedienungsanleitung

4. Installation ( for home back up system )

• The installation should be done by a licensed electrician.
• DO NOT place the power station near heat sources. It is prohibited to place the
equipment in an environment with flammable, explosive gas or smoke. It is also
prohibited to operate the equipment in this environment.
• DO NOT operate in wet conditions. If the equipment becomes wet, please let the
unit dry completely before using.
• DO NOT move the unit while operating as vibrations and sudden impacts may
lead to poor connections to the hardware inside.
• Before starting any work, turn off and isolate all electricity to the property at the
main panel.
• Take measures to prevent the electricity from turning back on while working, such
as a safety tag and lockout.
• Test the circuit's voltage before proceeding to verify that the course is off.
• Remove the idle package materials from the site before commissioning, such as
cartons, foam, plastic, cable ties, etc.
• Never touch electrical contacts or wiring without proper protection and safety
gear.
• Seal all the wiring ports with fireproof and water-proof materials to prevent
possible electric shock or other risks.
• Repaint any paint scratches caused during transportation or installation timely,
or it may cause equipment damage and personal injury.
• Keep the unit firmly secured to the ground or other solid objects, such as a wall or
mounting bracket.
11
JUST POWER ON