Bluetti EP500Pro Bedienungsanleitung Seite 50

PV1 Over Current
049
PV2 Over Current
050
PV1 Over Voltage
051
PV2 Over Voltage
052
053
054
Inverter Overload Warning
055
AC Overload Warning
056
Grid Voltage High
057
Grid Voltage Low
058
Grid Frequency High
059
Grid Frequency Low
060
Multi Communication Error
061
Multi Address Error
062
Multi Synchronization Error
063
50
JUST POWER ON
D-BAT Full
D-BAT Drained
Please contact the dealer if the symptom
persists after rebooting the unit.
Please contact the dealer if the symptom
persists after rebooting the unit.
Please check if the open circuit voltage of
solar panels exceeds the input voltage
range of EP500Pro.
Please check if the open circuit voltage of
solar panels exceeds the input voltage
range of EP500Pro.
The battery is full.
Out of battery.
Charge the EP500Pro. The alarm sutomatically
disappear when the battery SOC reaches 5%.
Turn ON AC on the screen.
Disconnect the load. Please make sure your
loads meet the specifications of the unit.
Disconnect the load. Please make sure your
loads meet the specifications of the unit.
Please check if the grid voltage meets the
specifications of EP500Pro.
Please check if the grid voltage meets the
specifications of EP500Pro.
Please check if the grid frequency meets the
specifications of EP500Pro.
Please check if the grid frequency meets the
specifications of EP500Pro.
Please check if the battery expansion cable
is connected properly.
Clear the alarm history or restart the unit.
Please check if the battery expansion cable
is connected properly.
Clear the alarm history or restart the unit.
Please check if the battery expansion cable
is connected properly.
Clear the alarm history or restart the unit.