Uvc Sterilizer With Pir Sensor And Night Light, Plug-In Version - Conrad 2388643 Betriebsanleitung

Operating Instructions
UVC Sterilizer with PIR sensor and night light,
plug-in version
Item No. 2388643
Intended use
This steriliser disinfects using UV-C light, photocatalysis and plasma ions and features an
intelligent CPU auto-sensing mode and night light time control.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you
use the product for purposes other than those described, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• UVC steriliser light
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave the packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts,
high humidity, moisture, flammable gases, steam, and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts, or a fall, even from a low
height, can cause damage to the product.
• Consult an expert when in doubt about the operation, safety, or connection of
the appliance.
• Maintenance, modifications, and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions that remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Caution:
• To avoid damaging the components, do not attempt to open or repair the product
without professional guidance.
• The operating range may be affected by environmental factors and nearby
sources of interference.
• Proper use helps to prolong the lifespan of the product.
• Operating instructions
b) Operation
• This product is designed for use in sanitary conditions only. It is powered by the
incorporated mains plug.
• It kills 99.9% of bacteria and viruses through three levels of sterilisation (UV light,
photocatalysis and plasma Ions).
• The product is maintenance-free and the filter does not need to be cleaned or
changed.
• There is no secondary pollution emitted from this product.
• For safety and approval purposes (CE), you must not rebuild and/or modify this
product. If you use the product for purposes other than those described above,
damage may be caused to the device.
• Improper use can cause hazards such as a short-circuit, fire or electric shock.
• Read the instructions carefully before use and keep them safe for future
reference.
• WARNING: Unauthorised conversion and/or modification of this device is
prohibited due to safety and approval regulations (CE). Any usage other than
described in this manual is not permitted and may damage the product or lead to
associated risks such as a short-circuit, fire or electric shock. Read this manual
thoroughly and keep it safe for future reference.
• We will not assume liability for resulting damages to property or personal injury
if the product is abused in any way or damaged by improper use or failure to
observe these operating instructions. Such cases will void the warranty. The
product is not a toy and should be kept out of the reach of children and pets.
Servicing, adjustments or repair work must only be carried out by a specialist/
specialist workshop.
Operating elements
1
2
3
6
5
1 ON/OFF switch
2 Light sensor/Power indicator
3 Ventilation slot (IN)
Operation
Disinfection, sterilisation, air purification and night light
1. Directly plug in the unit to a wall socket to power on the product.
2. Use the ON/OFF switch to alternate between sensor mode, always-on mode and shutdown
mode.
3. By default, the unit switches to sensor mode (indicated by the blue light) when powered on.
This mode is controlled by the PIR infrared body sensor; human body movement within the
detection range will activate the purifier. The purifier (fan, plasma purifier and UV light) will
operate for 1 hour once activated. If the sensor detects dim ambient light, the night light will
turn on for 5 minutes when human body movement is detected.
4. Press the ON/OFF button again to toggle to always-on mode (indicated by the green light).
In this mode, the air purifier will operate continuously. If the sensor detects dim ambient
light, the night light will turn on for 5 minutes when human body movement is detected.
5. Press the ON/OFF button again to toggle to shutdown mode. In this mode, press the ON/
OFF button again to toggle between the other modes.
6. The night light intensity can be adjusted between 4 levels (Off/Low/Medium/High);
the default setting is Medium. To adjust the intensity, hold down the ON/OFF button for
2 seconds. To set the intensity, press the ON/OFF button to toggle between levels. The
intensity level will be stored for future use. In the event of a power failure, all functions and
settings will be reset.
4
4 Ventilation slot (OUT)
5 Night light housing
6 Power plug