Pause Mode - Buffalo FB862 Bedienungsanleitung

EN
4. Door Open Mode
1. When the door is open, the oven will enter Door Open Mode. This allows for entry into Programming
Mode.
2. During this mode, the display is blank. The fan and oven lamp will work.
3. When the door is closed, if User Option OP:60 is selected and the oven was running a manual or
preset cook cycle, the oven will enter Pause Mode. In all other cases, the oven will return to Ready
Mode with User Option OP:61 selected.
• Note: Opening and closing the door will clear out any information about a Manual or Preset Program
which was running.

5. Pause Mode

This mode enables the user to temporarily stop the cooking cycle so as to inspect or stir food.
1. While in Manual Cook Mode or Preset Program Cook Mode, if the door is open and then closed, or if
is pressed, the oven will enter Pause Mode.
2. While paused, the display will show the remaining cooking time.
3. Pause Mode will return to Idle Mode in the exact fashion as Ready Mode, depending on User Option 4
setting. Additionally, if
pressed, the oven will continue to run the cooking cycle.
6. Manual Cook Mode
The user can manually set cooking time and power level while in this mode.
1. While in Ready Mode, press
2. Press the number buttons to input the cooking time as needed.
3. Press , ,
power. If the same button pressed twice, the power level will change to full power.
4. Press to start manual cooking.
5. Remaining cooking time is displayed. The fan and oven lamp will work.
6. When cooking program finishes, the oven will enter End of Cook Cycle Mode.
10
FB862_ML_A5_v2_20220527.indb 10 FB862_ML_A5_v2_20220527.indb 10
button is pressed, the oven will immediately enter Ready Mode. Or if
button to enter Manual Cook Mode. The display will show "00:00".
or button to select power level. The display will show the related
2022/5/27 10:21 2022/5/27 10:21