Herunterladen Diese Seite drucken

Outsunny 84C-145 Montageanleitung Seite 23

Vorschau ausblenden Andere Handbücher für 84C-145:

Werbung

STEP 19
T1
x 4
T1
EN:1.
T1 and T2 are divided into left and right directions,identification method:take apart the four
zippers,and install T1/T2 in a single piece.
on the small hole of the upright.
2.
There is no separate Bandage on T1,the Bandage has been sewn on T2.
DE: 1. T1 und T2 sind in linke und rechte Richtungen unterteilt, Identifikationsmethode: Nehmen Sie die vier
Reißverschlüsse auseinander und installieren Sie T1 / T2 in einem einzigen Stück. Der Eisenschrei an T1
geht durch das Loch an T2 und hakt an dem kleinen Loch des Pfostens.
2. Es gibt keinen separaten Bandage Verband auf T2, der Verband wurde auf T1 genäht.
ES: 1. T1 y T2 se dividen en direcciones izquierda y derecha, el método de identificación es siguiente:
Desmontar las cuatro cremalleras e instalar T1/T2 como una sola pieza. El gancho de hierro en T1 pasa a
través del orificio en T2 y se engancha en el pequeño orificio del poste.
2. No hay un vendaje separado en T2, el vendaje ha sido cosido en T1.
FR:1. T1 et T2 sont divisés en directions gauche et droite, méthode d'identification: démonter les quatre
fermetures éclair, et installer T1/T2 en une seule pièce. Le fer sur T1 passe a travers le trou sur T2 et
crochets sur le petit trou du montant.
2. Il n'y a pas de Bandage séparé sur T2, le Bandage a été cousu sur T1.
IT:1. T1 e T2 sono divisa tra direzione sinistra e destra , identificabili in questo modo: slacciare le quattro
cerniere e installare T1/T2 in un solo pezzo. ll gancio in metallo su T1 passa attravorso il foro di T2 e si
aggancia al piccolo foro del montante.
2. Non ci sono cinghie separata su T2, la cinghia è stata cucita su T1.
U
T1
The iron hoot on T2 passes through the hole on T1 and hooks
21
B1
or
B2
or
B3 B4
or
T1
T1
T1

Werbung

loading