Axis Communications TW1906 Battery Kit 5P Installationsanleitung Seite 12

• Never charge or discharge near flammable materials.
Doing so could result in fire.
• If electrolytes leak from the battery and comes into
contact with skin or clothing, immediately rinse with
water. Battery fluids may cause skin irritation.
• Discharged batteries may cause fire. Tape the
terminals to insulate, before disposing of the battery.
• If the battery terminals are dirty, clean them with
a dry cloth before installation. A bad connection
may prevent the body worn camera from functioning
normally, or the battery from charging.
• Store the battery at room temperature, charged to
about 40–60% of its full capacity. If you are storing
the battery for more than 3 months, charge it to 3.90
V every 3 months. If you are storing the battery for a
year or longer, discharge and charge the battery again.
WARNING
Soft aluminum packing foil
• Never strike the battery with any sharp object. The
soft aluminum packing foil is easily damaged by
objects with sharp edges, such as Ni-tabs and needles.
• Never strike a cell with any sharp object.
• Trim your nails or wear gloves before handling a cell.
• Clean the worktable to make sure it's free from any
sharp particles or objects.
WARNING
• Temperatures over 100°C (212°F) can damage the
sealed edge.
• Bending or folding the sealed edge can cause damage
to it.
12