Neoline X-COP 9300s Schnellstartanleitung Seite 8

Z-signature filter
A Z-signature filter is a know-how developed by Neoline to reduce the number of false warnings. It
recognizes and blocks most false warnings caused by other cars' blind zone sensors.
The key feature of our filter is that it blocks no true warnings (unlike many other similar filters).
Selecting the K band frequencies
23.900 - 24.250 GHZ
K Wide
24.045-24.190 GHz
K Narrow
K
24.045-24.145 GHz
Super-Narrow
Voltage disconnection
If the voltage in the car power circuit drops below 11V, a warning message appears on the device
display and the device turns off to avoid discharging the car battery.
DVR settings
Display brightness: adjusting the display brightness (the higher the value, the brighter the display).
Display auto turnoff: turning the display off in a set time.
Screensaver: showing one of the following screensavers while the display is off:
Speedometer: showing current speed and date
Dark: showing speedometer and GPS announcements on a black background.
Resolution: 1920*1080 (Full HD) /1280*720 (HD)
Record audio: recording audio in the car.
Video quality: setting the video quality; the higher the bitrate, the better the quality; yet, the video
file size also increases.
Sharpness: setting the image sharpness.
Contrast: setting the image contrast.
Exposition: setting the image exposition.
WDR: Wide Dynamic Range. The WDR feature provides colour/brightness/sharpness balance of the
images in bad capturing conditions.
Sensitivity (driving): setting the G-sensor sensitivity at driving.
Sensitivity (parking): setting the G-sensor sensitivity at parking.
Motion sensor (parking): setting the motion sensor sensitivity at parking.
Parking mode: setting the time to activate the Parking mode when the car does not move (yet the
engine is ON). Once the engine is OFF, the Parking mode activates immediately.
Record duration (driving): setting a single video record duration.
Cycled recording: setting cycled recording to the Event folder.
Record duration (driving): setting a single video record duration.
Cycled recording: setting cycled recording to the Event folder.
Satellite communication voice announcement: voice announcement of any satellite communication
becoming available.
Standard setting to detect all police radars within the K
Used to minimize the number of false warnings.
ATTENTION: It is recommended when you know the exactly
frequencies the police radars operate at in your region.
Used to minimize the number of false warnings.
ATTENTION: It is recommended when you know the exactly
frequencies the police radars operate at in your region.
7
band