Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4
Usage
ATTENTION: A new HDD/SSD must first be initialized, partitioned and formatted by the operating
system to be recognized and displayed by the system. If the hard disc is not recognized instantly by the
operating system please check:
•
if the driver software is installed and updated (USB)
•
if the HDD/SSD is initialized, partitioned and formatted.
ATTENTION: The IB-AC603b-U3 supports HotPlug function (hard disk can be changed during opera-
tion of the running computer). Please await write and copy operations to prevent data lost.
1.
Connect your 2.5" SATA SSD/HDD to the SATA connector.
2.
Connect the USB 3.2 Gen 1 Type-A connector to your host computer.
3.
The SSD/HDD will be recognized by the system and is ready for use.
Manual IB-AC603b-U3
Werbung
