System Requirements; Controls And Display; On/Off Switch - Hama N300 Bedienungsanleitung

• Lay all cables so that they do not pose a
tripping hazard.
• Do not drop the product and do not expose it
to any major shocks.
• The product may only be operated with the
type of power supply network described on
the name plate.
• Dispose of packaging material immediately
according to locally applicable regulations.
• Do not modify the product in any way. Doing so
voids the warranty.
• The product is intended for indoor use only.
• Use the item only in moderate climatic
conditions.
• Keep this product, as all electrical products, out
of the reach of children!
• Do not operate the product outside the power
limits given in the specifications.
• Do not use the product in areas where the use
of electronic devices is not permitted.
• Do not use the product in moist environments
and avoid splashes.
Risk of electric shock
• Do not open the device or continue to
operate it if it becomes damaged.
• Do not use the product if the
AC adapter, the adapter cable or the mains
cable are damaged.
• Do not attempt to service or repair the
product yourself. Leave any and all service
work to qualified experts.
Warning
• Only operate the product from an approved
socket that is connected to the public power
supply. The socket must be installed close to
the product and must be easily accessible.
• Disconnect the product from the power
supply using the On/Off switch – if this is
not available, unplug the power cord from
the socket.
• If using a multi-socket power strip, make
sure that the total power consumption of all
connected devices does not exceed the power
strip's maximum throughput rating.
• If you will not be using the product for a
prolonged period, disconnect it from mains
power.
Warning
Do not open the product. Do not continue to
operate the product if it is damaged, which may
be indicated by smoke, odours or loud noises.
Contact your dealer or our service department
immediately (see Service and Support).

4. System Requirements

Note that your computer or the wireless device in
question must be equipped with a WLAN network
card/USB stick or an integrated network adapter
with an RJ45 LAN interface.

5. Controls and Display

5.1. On/off switch

Pressing the on/off switch (1) will switch the
device on or off.
3