Adding Water - smartmi 2 Bedienungsanleitung

Use

Adding water

Suitable water quality：domestic, mineral or purified water.
Adding water through the water inlet
1
You can add water to the water tank through the water
inlet while the humidifier is unpluged.
Note: When the water volume exceeds the maximum water level line once the humidifier powered again, the water level indicator flashes and the
humidifier generates a beeping warning sound. If this happens, immediately unplug the humidifier and pour out proper amount of water from the tank.
Adding water to the water tank
2
When the upper housing has been removed, you
can add water directly to the water tank. Stop
adding water before it reaches the maximum water
level line (at the MAX bar).
6
MAX：maximum water level line