2.3. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience and/
or knowledge unless they are supervised by a person
responsible for their safety or they have received
instruction on how to operate the device.
c)
To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
d)
The device is not a toy. Children must be supervised to
ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
b)
Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces the
risk of accidental activation.
c)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
d)
Keep the device in perfect technical condition. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of
the device. If damage is discovered, hand over the
device for repair before use.
e)
Device repair or maintenance should be carried out by
qualified persons, only using original spare parts. This
will ensure safe use.
f)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
g)
When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country where
the device will be used.
h)
Do not move, adjust or rotate the device in the course
of work.
i)
Do not leave this appliance unattended while it is in
use.
j)
Clean the device regularly to prevent stubborn grime
from accumulating.
k)
The device is not a toy. Cleaning and maintenance may
not be carried out by children without supervision by
an adult person.
l)
Do not run the device when empty.
m)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
n)
Keep the device away from sources of fire and heat.
o)
Do not overload the device.
p)
Do not cover the ventilation openings!
8
q)
Open the housing under no circumstances.
r)
The device is a free-standing device and is not suitable
for fixed furniture joinery.
s)
The device is intended only for heating dishes.
Harmful fumes and vapours are generated when
heating adhesives, plastics, liquids and flammable
materials
t)
Do not use this device for drying, heating or dryout of
objects.
u)
Do not leave dishes in the switched off device.
Extracting moisture causes damage to the product.
v)
Liquids and foods must not be heated in closed
containers, as they may explode.
w)
Do not heat eggs in the shells because they may
explode.
x)
The device heats up during use, be careful.
y)
Liquids should be heated in wide-open vessels so
that the steam can escape freely. Never heat liquids in
narrow-necked containers, e.g. baby bottles.
z)
Do not heat food in containers with metal parts.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The device is intended for heating food and drinks. The
product is intended for home use only!
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
1
5
4
7
6
1.
Doors
2.
The knob for setting the operating time of the device
3.
The knob for selecting the operating mode of the
device
4.
Security locks
5.
Handle
6.
Rotary plate
7.
Rotary plate bracket
Rev. 05.10.2020
3.2. PREPARING FOR USE
APPLIANCE LOCATION
The temperature of environment must not be higher than
40°C and the relative humidity should be less than 85%.
Ensure good ventilation in the room in which the device is
being used. A minimum distance of 10 cm from each side of
the device must be maintained, 20 cm from the top of the
device. The minimum height of the placement of the device
is 85 cm from the floor. Keep the product away from hot
surfaces. The device should always be used when positioned
on an even, stable, clean, fireproof and dry surface, and be
out of the reach of children and persons with limited mental
and sensory functions. Position the device such that you
always have access to the power plug. The power cord
connected to the appliance must be properly grounded and
correspond to the technical details on the product label.
The device should be located about 5 meters from the TV,
radio, etc. in order not to disturb the signal.
ASSEMBLING THE DEVICE
Before the first use, install the rotary plate bracket and the
rotary plate in the device (in the marked place).
CAUTION! Always use the rotary plate during use.
Do not put the rotary plate upside down.
3.3. THE LIST OF COOKWARE
CAUTION! It is recommended to use vessels that are
2
suitable and safe for heating in a microwave oven,
according to the manufacturer's recommendations.
3
Application
Material
safety
Heat-
resistant
YES
ceramics
Heat-
resistant
YES
plastic
Heat-
resistant
YES
glass
Plastic foil
YES
Grilling rack
NO
Rev. 05.10.2020
Metal
utensils/
NO
vessels
Varnished
utensils/
NO
vessels
Bamboo
wood and
NO
paper
3.4. DEVICE USE
1.
Connect the device to the power supply.
2.
Open the device doors and put the food on the roatry
plate. Make sure that the vessel in which the food is
placed does not touch the internal walls of the device.
3.
Close the device doors.
4.
Set the heating parameters (Point 3.4.1. Programming)
5.
If a pause is required during heating, open the door,
closing the door continues heating.
6.
The device will signal the end of heating with a sound.
The lamp inside the device will turn off automatically.
7.
If the food is removed before the time limit has
expired, set the operating time knob to the „0"
position.
3.4.1. PROGRAMMING
DEVICE OPERATING TIME
Comments
Do not use ceramics
decorated with a metal
border or glazed.
•
Set the heating time with the operation time knob.
•
If the set time is less than 10 minutes, turn the
Do not use for long
operation time knob to more than 10 minutes and
heating in a microwave
then return to the desired time setting.
oven.
•
The maximum heating time is 30 minutes.
Do not use for heating
meat or chops, as
excessive temperature
may damage the foil.
Do not use in a
microwave oven. Metal
vessels can cause sparks
or fire the food.
Varnished utensils/
vessels have poor heat
resistance. Do not use at
high temperatures.
The material has
poor heat resistance.
Do not use at high
temperatures.
9