Instruction Manual K 22
K 22
________________________________________________________________________________________________________________
3.3. Service and maintenance instruction
This mechanical crimping unit has to be cleaned and dried after use. The unit is basically
maintenance-free, only the bolt joints have to be oiled regularly.
3.4. Storage and transport of the crimping tool
In order to protect the tool against damages it has to be cleaned carefully after every use
and be put into the transportation case which has to be closed safely. Into this case you can
put 17 dies and the instruction manual.
4. Troubleshooting
There is yet no information about problems in respect of the performance of the tool.
5. Technical Data
Crimping head can be turned 360° in a pressure-free state.
Weight of the tool:
Length of the entire tool:
WE.2800_F © 08/1996
ca. 2,5 kg
560-860 mm (infinitely variable adjustment)
page 15
14